Welcome to Shenzhen Anhang Technology Co., Ltd.

The LED Precision Approach Path Indicator (PAPI) is used to guide aircraft to approach the runway at an appropriate altitude.Such as Permanent, Temporary, Emergency Helipad/Airport/Helideck. It is specially designed to accommodate the helicopter'...

LED Surface Heliport Flood Light is used for illuminate the whole heliport area at night. It is specially designed for helipads/Helideck, providing glare-free, uniform surface lighting for landing and loading activities. LED Surface Floodlights impro...

This LED Low-intensity Double aircraft warning light is a steady burning (20/30/60fpm is adjustable) aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height.such as, High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine.

heliport light remote controller, pilot to ground control

This Low-intensity L810 light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height,such as, High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine.

This LED Medium-intensity Aviation Obstruction Light emitting red color, designed for marking top of obstacle which height is more than 45meters.such as, High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine.Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.

This High-intensity Aviation Obstruction Light flashing white color 24 hours and designed for marking top of obstacle that exceed 150 meters in height. Ultra high intensity CREE LED is used for the light source ensure light’s long life experience and good performance. Self-designed reflection board ensure less LED could emitting brighter light.

This solar Low-intensity Type E light is a Flashing Red aviation obstruction light designed installed on the wind Turbine. There is no need for external power input. The vertical degree of the solar panel is adjustable to ensure it could get the most sunlight in different area.

This LED Medium-intensity Aviation Obstruction Light flashing white color, designed for marking top of obstacle which height is more than 105meters. Such as, High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.

This LED Medium-intensity Aviation Obstruction Light emitting red color(white color is optional), designed for marking top of obstacle which height is more than 45meters.Such as, High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwa...

An aerodrome shall be equipped with at least one wind cone as wind direction indicator. The flood light for illumination is inside wind sock, it will rotate together with windsock too. One obstruction light on top for aircraft warning.

Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. It could be used as Aiming point light, perimeter light of FATO (Final approach and take-off areas), TLOF ...

The LED Precision Approach Path Indicator (PAPI) is used to guide aircraft to approach the runway at an appropriate altitude.Such as Permanent, Temporary, Emergency Helipad/Airport/Helideck. It is specially designed to accommodate the helicopter'...

LED Surface Heliport Flood Light is used for illuminate the whole heliport area at night. It is specially designed for helipads/Helideck, providing glare-free, uniform surface lighting for landing and loading activities. LED Surface Floodlights impro...

This LED Low-intensity Double aircraft warning light is a steady burning (20/30/60fpm is adjustable) aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height.such as, High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine.

heliport light remote controller, pilot to ground control

This Low-intensity L810 light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height,such as, High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine.

This LED Medium-intensity Aviation Obstruction Light emitting red color, designed for marking top of obstacle which height is more than 45meters.such as, High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine.Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.

This High-intensity Aviation Obstruction Light flashing white color 24 hours and designed for marking top of obstacle that exceed 150 meters in height. Ultra high intensity CREE LED is used for the light source ensure light’s long life experience and good performance. Self-designed reflection board ensure less LED could emitting brighter light.

This solar Low-intensity Type E light is a Flashing Red aviation obstruction light designed installed on the wind Turbine. There is no need for external power input. The vertical degree of the solar panel is adjustable to ensure it could get the most sunlight in different area.